What is Ultraformer III? A device for lifting and tightening the face, reducing wrinkles, and firming the skin without surgery.

Say goodbye to sagging! Restore a young face, firm skin, lift and tighten skin, adjust facial shape, and reduce wrinkles with the Ultraformer III service, one of the non-surgical skin-lifting procedures. Suitable for those who have problems with sagging skin, hanging cheeks, deep wrinkles, and want to tighten the face frame, double chin, and adjust the face shape to a slender V-shape.

Table of Contents

What is Ultraformer III?

Ultraformer III is a medical device that combines two cutting-edge technologies in one device. Provides efficiency in reducing wrinkles and breaking down fat precisely. without affecting nearby tissues The heart of the Ultraformer III is MMFU (Micro & Macro Focused Ultrasound) technology that can emit high intensity sound waves. Accurately penetrates beneath the skin at all levels. Without causing any wounds or pain, after the procedure you can put on makeup and live a normal life immediately. Importantly, the time it takes to make is only 15-30 minutes. 

What does Ultraformer III help with? Why should I do it?

Ultraformer III is the answer to all skin problems. With cutting-edge technology that helps lift and tighten Reduce wrinkles Stimulates collagen and breaks down fat effectively, suitable for people with the following problems:

face:

  • Sagging facial skin
  • Wrinkles, deep grooves
  • Tighten the face frame, reduce double chin 
  • Drooping eyebrows, drooping eyelids
  • large pores
  • Want to adjust your face to be V-Shape?

Body:

  • Accumulated fat around the abdomen
  • upper arm thigh
  • Bra Line, Love Handle area
  • Area around the knee

'Ultraformer III, a V-Shape face lifting machine, firm facial skin, no wrinkles, restores youthfulness to the face'

What styles of Ultraformer III ultrasound heads are there?

At the heart of the Ultraformer III are the various ultrasound heads. Each head is designed to Manage skin problems That occurs at different levels of the skin.

  • The head emits energy at a depth of 1.5-2.0 mm for treating the epidermis. Helps reduce wrinkles and deep grooves that are not too heavy, such as around the eyes, between the eyebrows, and on the forehead.
  • The head emits energy with a depth of 3.0 mm for the middle layer of the skin. Helps in reducing the amount of fat and cellulite. Make the face firmer and stimulates the production of collagen in the cheek area Helps the skin look firmer.
  • The head emits energy at a depth of 4.5 mm for treating SMAS skin that normally requires face-lift surgery. Helps in lifting and tightening the cheeks, double chin, neck and enhancing the facial frame.

In addition, there is a special Cherry Pink head with a depth of 2.0 millimeters, designed in a tapered shape. Helps to treat skin problems more accurately. With MF2 Macro Focus Ultrasound technology, which has the ability to deliver up to 8 times the cumulative energy, helping to improve results.

Ultraformer III, great price promotion from PONGSAK CLINIC.

Experience lifting, tightening, adjusting facial shape, reducing wrinkles. With cutting-edge technology like Ultraformer III at a great price at PONGSAK CLINIC, how much the Ultraformer treatment costs depends on the skin problem you want to treat. By expert doctors ready to design the treatment that is most suitable for you. To give you the easiest access to treatment

Why choose Ultraformer III at PONGSAK CLINIC?

  • Rest assured that all your treatments are safe with the genuine Ultraformer III, Korean standard, premium grade.
  • Expert medical team Evaluate your skin problems and design the right treatment for you.
  • Great value price
  • Ask questions or get a free skin problem assessment. without charge

Who is Ultraformer suitable for?

  • People who have sagging skin problems Lack of conciseness Both in the face and neck
  • People who want to fix the double chin problem Or the face looks round due to the accumulation of fat.
  • People who have problems with wrinkles around the eyes, droopy eyelids, and droopy mouth corners.
  • People who have deep cheek problems Sagging cheeks 
  • Those who want a clearer facial frame The face has a slender V-Shape.

Difference between Ultraformer III – Ulthera – Thermage 

Current technology that helps lift and tighten the face Without surgery, there are many options. Each one has its own strengths and is suitable for different patients.

  • Ultraformer III: cutting-edge technology from South Korea Uses Macrofocus ultrasound sound wave energy, size 0.5-1 mm, to focus on lifting and tightening the skin. Stimulate collagen by doing Ultraformer III. See clear results from the first time. Results last for 6 months, suitable for people with sagging skin problems. Want to lift and tighten your face?
  • Ultherapy: The original lifting and tightening device using ultrasound waves. High power comes with a depth level display. Helps the doctor to release energy precisely. Results last up to 1 year, suitable for people who have problems with very sagging skin. Want clear, longer-lasting results?
  • Thermage: Monopolar RF radio frequency technology emits 3-4 cm of energy to cover a wide area. Suitable for people who have problems with accumulated fat, large pores, and want smooth skin. Facial skin is full and fluffy.

How long does Ultraformer III last?

Normally, with just 1 session of Ultraformer III, you will see clear results. Facial skin will be lifted and tightened. Pores become smaller. Wrinkles become shallower. These results will last approximately 5-6 months, but if you want more visible and longer-lasting results, it is recommended to do Ultraformer III 2-3 times a year, as continuous treatment stimulates collagen production. Helps the facial skin to be firm, flexible and youthful for a long time.

After Ultraformer III, how should I take care of myself?

After Ultraformer III, you can return to your normal daily life without needing to rest. However, you should be careful in taking care of your skin to get the best results as follows:

  • – Apply facial moisturizer and use sunscreen with a high SPF every time you go out in the sun to protect your skin from the sun and UV rays that can cause premature skin aging.
  • – If possible, avoid direct sunlight for 1-2 weeks to allow the skin time to heal and produce collagen better.
  • – If you feel tired or your skin feels tight, you can take painkillers as needed.
  • – Avoid smoking and drinking alcohol, as these can damage collagen production under the skin.
  • – Drink plenty of water to help your skin retain moisture better. Avoid letting your skin dry out.

Following these guidelines will help ensure the results of your Ultraformer III are as sustainable and effective as possible.

Process for making Ultraformer III

Before having your face lifted and tightened with Ultraformer III, you should prepare yourself by getting enough rest, refraining from smoking, and refraining from drinking alcohol. And eat all 5 food groups for better results. Because when our body is healthy, it helps create new collagen cells more efficiently. The process of making Ultraformer III has 5 steps as follows:

  1. The doctor will analyze your skin condition, assess the problem, and design a customized treatment for you. for results that meet your needs
  2. Clean the face To remove dirt and excess oil. Get ready for treatment
  3. To reduce the feeling of pain during treatment It takes about 30 minutes.
  4. The doctor will use the Ultraformer III to release ultrasound energy into the skin. Stimulate the creation of collagen Helps the facial skin to be lifted, tightened, and wrinkles softened. It takes about 15-30 minutes, depending on the area being treated.
  5. After the procedure, you can live your life normally. There may be a slight feeling of stiffness. But it will disappear within 1 hour.

How many shots of Ultraformer III do I need to take to see results?

Number of shots used for treatment Depends on the problem and skin condition. of each person Your doctor will evaluate and treat you with the appropriate number of shots. In general, the number of shots used is

  • 400-500 Shots for the entire face 
  • 100-200 Shots for forehead area
  • 100-150 Shots for the eye area
  • 300-500 Shots for 2 cheek areas 
  • 150-300 Shots for the chin or double chin area

Does Ultraformer III hurt?
During use of the Ultraformer III, the patient may feel warm energy touching the skin, but the extent of this sensation will vary. It depends on the sensitivity of each person.

Where should I choose to make my Ultraformer III? What should I consider?

  1. Choose the right clinic that is open Received a license from the Ministry of Public Health There are safety standards in place, equipment, and skilled medical personnel.
  2. The doctor who performs the procedure should have experience. Understand facial structure Able to analyze problems and choose the appropriate energy release technique. In order to be able to solve problems that meet the needs of each person.
  3. Verify that the clinic uses only genuine Ultraformer III machines. This is because counterfeit devices may transmit power unevenly. Risk of many skin problems
  4. Find reviews from real users. Through reliable channels such as review websites or social media for decision making
  5. Choose a clinic that has various contact channels, such as Line@ phone number or Facebook page, to conveniently inquire, request advice, or report problems.

With all the features you need to consider when choosing Ultraformer III, at PONGSAK CLINIC we pay close attention to these standards, which has led us to receive awards for lifting for 6 years in a row.

Ultraformer III reviews from real users at PONGSAK CLINIC

Frequently asked questions about Ultraformer

What is Ultraformer III?

Ultraformer III is state-of-the-art technology that combines the power of MMFU: Micro & Macro Focused Ultrasound. Provides efficiency in lifting, tightening, adjusting facial shape, and removing wrinkles with precision.